News
-
What information can we learn about rubber expansion joints？
Rubber Expansion Joint is an elastic connection device used in pipeline systems, mainly used to absorb and compensate for pipeline deformation caused by temperature changes, vibration, or pipeline movement. Compared with metal expansion joints, rubber expansion joints usually use rubber or synthe...Read more -
What information can we learn about metal expansion joints？
Metal Expansion Joint is a device used to compensate for thermal expansion, contraction, and pipeline deformation caused by temperature changes, vibration, or other reasons in pipeline systems. They are usually made of metal materials and can absorb and compensate for pipeline deformation without...Read more -
The differences and advantages and disadvantages of dismantling joint compared to metal compensators.
Dismantling transmission joints and metal compensators are two different mechanical components that have significant differences in design, function, and application. The following are their differences and their respective advantages and disadvantages: Dismantling joint: Differences: 1. Usage: D...Read more -
What are the impacts of using flanges with different thicknesses?
1.Capacity: Thicker flanges are usually better able to withstand pressure and torque. In high-pressure or high torque applications, choosing thicker flanges can provide stronger support. 2.Cost: Generally speaking, thicker flanges require more materials, so they may be more expensive. In the ca...Read more -
What is the difference about Japanese standard SS400 and National standard Q235B ?
SS400 is a marking method of Japanese steel materials and a judgment standard. Structural steels in foreign standards are often classified according to tensile strength, such as SS400 (marked as such in Japan), where 400 represents σ The minimum value of b is 400MP. Ultra high strength steel ref...Read more -
Vietnamese representation of common flange and pipe fittings products
When communicating with Vietnamese customers, we often encounter Vietnamese expressions for some products, such as our common flanges and pipe fittings. In this document, we will list some commonly encountered Vietnamese expressions. 法兰 Flange Pháp 带颈对焊法兰 Welded Neck flange Mặt...Read more -
The difference between RF flange and RTJ flange.
RF (Raised Face) flange and RTJ (Ring Type Joint) flange are two common flange connection methods, with some differences in design and application. Sealing method: Raised Face: RF flanges typically have raised flat sealing surfaces, which use gaskets (usually rubber or metal) to provide sealing. ...Read more -
We Are ISO Certified.
In this era of pursuing quality and reliability, obtaining ISO certification is definitely an important milestone for all companies or organizations. Our company is honored to announce that after arduous efforts, we have also successfully passed the ISO certification. I believe this is a manifest...Read more -
Advantages of Slip On Hubbed Flange for Industrial Use.
Hubbed slip on flange is a kind of flange, which is widely used in the mechanical industry and has been praised by users. This article will give you a detailed introduction to some advantages of the neck slip on welding flange in industrial applications for your selection and reference: 1. As the...Read more -
WHAT IS FLANGE？WHAT ARE THE TYPES OF FLANGE?
A flange is a protruded rim or edge on a pipe, valve, or other object, typically used to increase strength or facilitate the attachment of pipes or fittings. Flange is also known as flange convex disk or convex plate. It is a disk-shaped parts, generally used in pairs.It is mainly used between th...Read more -
About seamless and seam
In pipe fittings such as elbows, reducers, tees, and flange products, “seamless” and “straight seam” are two commonly used pipe manufacturing processes, which refer to different pipe manufacturing methods with different characteristics and applicability. Seamless There are...Read more -
Do you know about galvanized steel pipes?
Galvanized steel pipe is a type of steel pipe with a zinc coating on its surface, whose main purpose is to prevent surface corrosion of the steel pipe. The process of galvanizing usually involves immersing the steel pipe in molten zinc, causing a chemical reaction between the zinc and the surface...Read more -
Differences and Similarities between ASTM A153 and ASTM A123: Hot Dip Galvanizing Standards
ASTM A153 and ASTM A123 are two different standards developed by the American Society for Testing and Materials (ASTM International), mainly related to the specification of galvanized steel. The following are their main similarities and differences: Similarities: Target area: Both involve hot-di...Read more -
How to distinguish between welding neck flange and loose sleeve flange
Necked flat welding flange and loose sleeve flange are two different types of flanges, which have some differences in appearance and use. The following are the main distinguishing points between neck welding flanges and loose sleeve flanges: Flange shape: Flat welding flange with neck: This type ...Read more -
ISO 9000: International certification of quality management systems
Under the international standards of products, ISO, as one of the important standards, is increasingly used as one of the tools for customers and friends to judge product quality. But how much do you know about the ISO 9000 and ISO 9001 standards? This article will explain the standard in detail....Read more -
About Butt Welding Connection
Butt welding connection is one of the commonly used connection methods in the engineering field, and one important type is “butt welding” or “fusion welding”. Butt welding is a common metal connection technique, especially suitable for the connection of identical or simila...Read more -
Comparison and Differences between ASTM A153 and ASTM A123 Hot Dip Galvanizing Standards.
Hot dip galvanizing is a common metal anti-corrosion process widely used in steel products to extend their service life and provide better protection. ASTM (American Society for Testing and Materials) has developed multiple standards to standardize the procedures and requirements for hot-dip galv...Read more -
What information is needed when ordering for bellows?
Bellows is a flexible metal pipe or fitting with a corrugated appearance, usually made of stainless steel or other metals. This specially designed pipe structure gives it some unique properties that make it suitable for a variety of industrial and commercial applications. When we as purchasers wa...Read more -
Correct installation method of rubber expansion joint!
Rubber expansion joints are an important component used in piping systems that absorb the expansion and contraction of pipes due to temperature changes or vibrations, thereby protecting the pipes from damage. Here are the general steps for properly installing a rubber expansion joint: 1.Safety me...Read more -
Explore the factors causing stainless steel pipe rust.
Stainless steel pipes are popular for their corrosion resistance, but surprisingly, they still have the potential to rust under certain conditions. This article will explain why stainless steel pipes rust and explore how these factors affect stainless steel’s resistance to rust. 1.Oxygen Oxygen i...Read more -
What information you need to know if you want to place an order for welded pipe fitting？
When you want to place an order for welded pipe fittings, you need to know the following key information to ensure that the order is accurate and meets your needs: Material type: Clearly specify the type of material required for welding pipe fittings, usually metal materials, such as carbon steel...Read more -
What do you need to know if you want to order flanges?
When we want to place an order for flanges, providing the manufacturer with the following information can help ensure that your order is processed accurately and smoothly: 1. Product specifications: Clearly specify the specifications of the required products, including size, material, model, pre...Read more -
How to distinguish between lap joint flange and FF plate flange
Loose sleeve flange and FF plate flange are two different types of flange connections. They have different characteristics and appearance. They can be distinguished in the following ways: Flatness and concavity of flange surface: Loose sleeve flange: The flange surface of a loose sleeve flange is...Read more -
AWWA c207 international standard and slip on hubbed flange under this standard
The AWWA C207 standard was developed by the American Water Works Association (AWWA) and is mainly aimed at standard specifications for flange connection components in municipal water supply and sewerage systems. The full name of this standard is “AWWA C207 – Steel Pipe Flanges for Wat...Read more -
Introducing about Blind flange
Blind flanges are an important component in piping systems, often used to seal openings in pipes or vessels for maintenance, inspection, or cleaning. In order to ensure the quality, safety and interchangeability of blind flanges, the International Organization for Standardization (ISO) and other ...Read more -
What are the international standards for reducer?
Reducer is a pipe connector commonly used in piping systems and equipment connections. It can connect pipes of different sizes together to achieve smooth transmission of fluids or gases. In order to ensure the quality, safety and interchangeability of reducers, the International Organization for ...Read more -
Tube Southeast Asia 2023 is on show!
Recently, the Tube Southeast Asia 2023 exhibition has started, the exhibition will be on display from September 20 to September 22, Thailand local time 10 AM to 18 PM. The company participated in the exhibition, and welcome friends from all over the world to come to the booth to exchange and und...Read more -
Why ASTM A516 Gr.70 flanges are more expensive than ASTM A105 flanges?
Both ASTM A516 Gr.70 and ASTM A105 are steels used for different applications, for pressure vessel and flange fabrication respectively. The price difference between the two can be caused by several factors: 1. Material cost difference: ASTM A516 Gr.70 is usually used to manufacture pressure vesse...Read more -
What are the similarities and differences between lap joint flange and hubbed slip on flange？
Flanges are important components in piping systems, used to connect various pipe sections and provide easy access for inspection, maintenance and modification. Among the many types of flanges, Lap Joint Flange and Hubbed Slip-On Flange are two common choices. In this article, we will conduct a co...Read more -
About Long Weld Neck Flange
In the industrial and engineering fields, long welding neck flange is a key pipeline connection component, which plays a vital role in ensuring the safety and reliability of fluid and gas transmission. A long neck butt weld flange is a specially designed flange with unique characteristics that ma...Read more
