Eccentric reducer refers to the reducer whose center is not on the same straight line. Its function is to stick to the wall or stick to the ground to walk the pipeline without occupying space, and it is to connect two pipes with different diameters to change the flow.
Product specification:
3/4 “X1/2″ — 48 “X 40″ [DN 20 X 15 --- 1200 X 1000]
Packaging method:
Fumigation free wooden cases and pallets can be specially packaged according to customer requirements.
Product application:
Petroleum gas pipeline engineering, natural gas pipeline engineering, chemical plant, power plant, shipyard, pharmacy, dairy, beer, beverage, water conservancy, etc
Product material:
Carbon steel: 10 #, 20 #, A3, Q235A, 20G, 16Mn, ASTM A234, ASTM A105, etc
Stainless steel: ASTM A403, 1Cr18Ni9Ti, 0Cr18Ni9, 00Cr19Ni10, 00Cr17Ni14Mo2, 304, 304L, 316, 316L, etc
Stress distribution:
(1) The bending moment caused by the area pressure difference between the big and small ends of the concentric reducer under the action of internal pressure causes the phenomenon that the big end opens relatively and the small end shrinks relatively;
(2) Under the action of internal pressure, the circumferential stress on the inner surface of the large end of the eccentric side and the outer surface of the middle of the eccentric side of the eccentric reducer is the largest.
Following points should be noted:
1. Control caliber: DIN standard (DN10-DN150), 3A/IDF standard (1/2 “- 6″), ISO standard（ Ф 12.7- Ф 152.4)；
2. International industrial standards: DIN, ISO, SMS, 3A, IDF, etc;
3. Product material: stainless steel 304, 316, 316L;
4. Quality and application: The reducer is treated with high-grade polishing equipment inside and outside to meet the surface precision requirements; This product is suitable for dairy, food, beer, beverage, pharmacy, cosmetics and other industrial fields;
5. External processing: non-standard products can be processed with drawings and samples according to user requirements;
6. Connection mode: clamp (quick installation) type, welding type, thread (union) type.
Note: The reducer is also suitable for pipe diameter reduction in the environmental protection and dust removal industry. It is generally made of rolled steel plates, cut and welded. The pipe diameters are different, and the materials are generally hot-rolled coils. It is applied very well and can save costs.
Post time: Jan-03-2023
