EPDM-Good heat resistance and suitable for alkaline waste water,compressed air terpolymer(oil free) and chemicals,weather- resistance,good gas tightness except for hydrocarbon.
NBR-Oil and fuel quality,also suitable for gases,solvents and fats.
Polytetrafluoroethylene (PTFE) has a series of excellent performance:
High temperature resistance: long-term use temperature 200 ~ 260 degrees;
Low temperature resistance: still soft at – 100 degrees;
Corrosion resistance: resistant to aqua regia and all organic solvents;
Weather resistance: the best aging life of plastics;
High lubrication: with the smallest friction coefficient in plastics (0.04);
Non-stickiness: It has the minimum surface tension in solid materials and does not adhere to any substance;
Non-toxic: physiological inertia.
1.The HEBEIXINQIpump connector and expansion joint protects your pumps and reduces noise and vibration.
2.A durable joint for piping systems reaching temperatures up to 250°F (121°C), the HEBEIXINQI joint differs from standard EPDM expansion joints by integrating HEBEIXINQI cording and peroxide-cured EPDM. It is perfect for high-temp applications requiring modest pipe movement/expansion at higher temperatures.
3.The rugged, long-lasting material and construction will provide years of trouble-free operation at high temperature.An anchor wire, fully-wrapped with HEBEIXINQI corded material, ensures a positive seal between the body and the floating flange.
4.The HEBEIXINQI Style rubber expansion joints are furnished complete with plated carbon steel flanges for corrosion protection. Q235 other 304 or 316 stainless steel flanges are available upon request as well as ANSI 150/250/300 lb., BS-10, DIN PN10 & PN16 and JIS-10K drilling.
5.HEBEIXINQI reinforced, peroxide-cured EPDM rubber greatly enhances tolerance to high temperatures.Anchor wire wrapped with HEBEIXINQI corded material ensures a positive seal between the body and the floating flange.Reduces noise and vibration.Isolates and protects the pump.Available in single and double sphere styles.
Rubber ball design |
Permissible operating data |
Electrical resistance |
Hardness shore A |
|||
Core (inner) |
Reinforcing material |
Cover (outer) |
bar |
℃ |
||
EPDM EPDM NBR NBR |
Nylon cord Aramid Nylon cord Aramid |
EPDM EPDM CR CR |
8 80 8 80 |
90 130 90 100 |
7×10^25×10^2 |
60 60 60 60 |
CSM NBR FKM |
Nylon cord Nylon cord
|
CSM CR EPDM |
8 10 10 |
90 80 150 |
4×10^2 5×10^2
|
65 55 65 |
Nominal Diameter (DN) |
Length (mm) |
Diameter of the central ring of the bolt(mm) |
Hole diameter -quality |
Axial Displacement |
Horizontal |
Deflection Angle(a1+a2)° |
||
mm |
inch |
Extension (mm) |
Compression (mm) |
|||||
40 |
1½ |
165 |
110 |
18-4 |
30 |
50 |
45 |
35 |
50 |
2 |
165 |
125 |
18-4 |
30 |
50 |
45 |
35 |
65 |
2½ |
175 |
145 |
18-4 |
30 |
50 |
45 |
35 |
80 |
3 |
175 |
160 |
18-8 |
35 |
50 |
45 |
35 |
100 |
4 |
225 |
180 |
18-8 |
35 |
50 |
40 |
35 |
125 |
5 |
225 |
210 |
18-8 |
35 |
50 |
40 |
35 |
150 |
6 |
225 |
240 |
22-8 |
35 |
50 |
40 |
35 |
200 |
8 |
325 |
295 |
22-8 |
35 |
50 |
40 |
35 |
250 |
10 |
325 |
350 |
22-12 |
35 |
60 |
35 |
30 |
300 |
12 |
325 |
400 |
22-12 |
35 |
60 |
35 |
30 |
350 |
14 |
330 |
460 |
22-16 |
35 |
60 |
35 |
30 |
400 |
16 |
330 |
515 |
22-16 |
35 |
60 |
35 |
30 |
450 |
18 |
330 |
565 |
26-20 |
35 |
60 |
35 |
30 |
500 |
20 |
350 |
620 |
26-20 |
35 |
60 |
35 |
30 |
600 |
24 |
350 |
725 |
30-20 |
35 |
60 |
35 |
30 |
700 |
28 |
350 |
840 |
30-24 |
35 |
60 |
35 |
30 |
800 |
32 |
400 |
950 |
30-34 |
35 |
60 |
35 |
30 |
1. Rubber soft joint should not be installed beyond the limit of displacement.
2. Pipeline must have fixed support or bracket, and the force of fixed bracket must be greater than the axial force.
3. When installing vertically or overhead, fixing brackets and stress brackets should be installed at both ends of the product to prevent pulling-out after working under pressure.
Union Material: Galvanized/Black Malleable Iron, SS304, SS316
Material: NBR, EPDM
Operating Pressure: PN16, 150LB
Size: DN15-80
Polytetrafluoroethylene (PTFE) uses industrial chemicals, petrochemical, oil refining, chlor-alkali, acid-making, phosphorus fertilizer, pharmaceuticals, pesticides, chemical fibers, dyeing, coking, gas, organic synthesis, non-ferrous smelting, steel, atomic energy and polymer filter materials, high purity product production (such as ionic membrane electrolysis), transportation and operation of viscous materials, hygiene. Highly demanding food and beverage processing and production departments.
In strict accordance with international standards and raw material quality requirements, HEBEIXINQI has put an end to jerry-building and material reduction. Environmental protection standards, that is, raw materials of products need not only new materials, but also new materials of environmental protection level.
Rubber joint has good comprehensive performance, so it is widely used in chemical industry, construction, water supply, drainage, oil, light and heavy industry, refrigeration, health, water heating, fire protection, electric power and other basic projects, especially for pipelines with large vibration and frequent changes in heat and cold.
1.Shrink bag–> 2.Small Box–> 3.Carton–> 4.Strong Plywood Case
One of our storage
Loading
Packing & Shipment
1.Professional manufactory.
2.Trial orders are acceptable.
3.Flexible and convenient logistic service.
4.Competitive price.
5.100% testing,ensuring the mechanical properties
6.Professional testing.
1.We can guarantee the best material according to related quotation.
2.Testing is performed on each fitting before delivery.
3.All packages are adapt for shipment .
4. Material chemical composition is conformed with international standard and environment standard.
A) How can I get more details about your products?
You can send an email to our email address. We will provide catalogue and pictures of our products for your reference.We can also supply pipe fittings, bolt and nut, gaskets etc. We aim to be your piping system solution provider.
B) How can I get some samples?
If you need, we will offer you samples for free, but new customers are expected to pay express charge.
C) Do you provide customized parts?
Yes, you can give us drawings and we will manufacture accordingly.
D) To which country have you supplied your products?
We have supplied to Thailand, China Taiwan, Vietnam, India, South Africa, Sudan, Peru , Brazil, Trinidad and Tobago, Kuwait, Qatar, Sri Lanka, Pakistan, Romania, France, Spain, Germany, Belgium, Ukraine etc. (Figures here only include our customers in latest 5 years.).
E) I can’t see the goods or touch the goods, how can I deal with the risk involved?
Our quality management system conforms to the requirement of ISO 9001:2015 verified by DNV. We are absolutely worth your trust. We can accept trial order to enhance mutual trust.