2022 China New Design Asme B16.47 Series B Flange - ASMEANSI B16.5 Slip-on Flange – Xinqi

Product Description

The slip on flange, like the plate flat welding flange, is also a flange that extends the steel pipe, pipe fittings, etc. into the flange and connects with the equipment or pipeline through the fillet weld. The slip on flange is also a flat welding flange, because there is a short neck, which increases the strength of the flange and improves the bearing capacity of the flange. So it can be used on higher pressure pipelines.

Product Features

Product Features

pros and cons

    Advantages: Flat-welded flanges with necks are also flat-welded flanges, because there is a short neck, which increases the strength of the flange and improves the bearing capacity of the flange. So it can be used on higher pressure pipelines.

    Disadvantages: Compared with the plate-type flat welding flange, the cost is higher, and it is easier to bump during transportation due to its shape characteristics.

The difference between SO and WN

1. The welding seam forms are different:

  Flat welded seams cannot be radiographically inspected, but butt welded seams can. The welding seam form of the necked flat welding flange pipe and the flange is a fillet weld, while the welding seam form of the neck butt welding flange and the pipe is a girth weld; the flat welding is two fillet girth welds, A butt weld is a butt girth weld. The difference between the flat welding flange with neck and the flat welding flange without neck is that the flat welding flange with neck is one more place in the pipeline welding part than the flat welding flange without neck. The flange is also a flat flange, and the boss without flange is also a flat fillet weld. The weld between the necked butt welding flange and the connecting pipe belongs to the B-type seam, and the weld between the necked butt-welding flange and the connecting pipe belongs to the C-type seam, and the non-destructive testing after welding is different.

2. The nominal pressure is different:

  the nominal pressure of the necked flat welding flange is: 0.6—4.0MPa, while the nominal pressure of the necked butt welding flange is: 1–25MPa level, obviously, the necked flat welding flange The adaptive pressure level is lower.

3. Different connection methods:

  The biggest difference in structure between the necked flat welding flange and the necked butt welding flange is the connection between the nozzle and the flange. The necked flat welding flange is generally a nozzle and a flange corner connection. , And the butt welding flange with neck is the butt joint between the flange and the nozzle.

  Flat welding flanges can generally only be connected to pipes, not directly to butt welded pipe fittings; butt welded flanges can generally be directly connected to all butt welded pipe fittings (including elbows, tees, reducers, etc.), of course Also includes pipes.

  The stiffness of butt welding flange with neck is higher than that of flat welding flange with neck, and the strength of butt welding is higher than that of flat welding, and it is not easy to leak.

  Welding neck flanges and butt welding neck flanges cannot be replaced casually. From the manufacturing point of view, the welding neck flanges (SO is the abbreviation of SLIP ON) have a large inner diameter, which means low weight and low cost. In addition, the nominal diameter Neck butt welding flanges (WN is the abbreviation of WELDING NECK) larger than 250mm need to be tested, SO flanges do not need to be tested, so the cost is relatively low.

  Flat neck welding is used more in imported oil installations, similar to the American standard S0, butt welding flange with neck is used for highly hazardous media

Slip On Flange Display

Main Connection Size of Slip On Flange

Flange Types

Weld Neck

This flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications
erosion inside the pipeline. The weld neck is therefore favoured in critical applications.

Slip-on
This flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.

Blind
This flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.

Socket Weld
This flange is counter bored to accept the pipe before being fillet welded. The bore of the pipe and flange are both the same therefore giving good flow characteristics.

Threaded
This flange is referred to as either threaded or screwed. It is used to connect other threaded components in low pressure, non-critical applications. No welding is required.

Lap Joint
These flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. This means the stub end or taft always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these flanges can be supplied without a hub and/or in treated, coated carbon steel.

Ring Type Joint
This is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck, Slip-on and Blind Flanges.

Application of Flange

constructions,
petroleum,
chemical industry,
ship building,
paper making,
metallurgy,
water supply and sewage work,
light and heavy industry,
plumbing and electric etc.

1.Shrink bag–> 2.Small Box–> 3.Carton–> 4.Strong Plywood Case

One of our storage

Loading

Packing & Shipment

1.Professional manufactory.
2.Trial orders are acceptable.
3.Flexible and convenient logistic service.
4.Competitive price.
5.100% testing,ensuring the mechanical properties
6.Professional testing.

1.We can guarantee the best material according to related quotation.
2.Testing is performed on each fitting before delivery.
3.All packages are adapt for shipment .
4. Material chemical composition is conformed with international standard and environment standard.

A) How can I get more details about your products?
You can send an email to our email address. We will provide catalogue and pictures of our products for your reference.We can also supply pipe fittings, bolt and nut, gaskets etc. We aim to be your piping system solution provider. 

B) How can I get some samples?   
If you need, we will offer you samples for free, but new customers are expected to pay express charge. 

C) Do you provide customized parts? 
Yes, you can give us drawings and we will manufacture accordingly. 

D) To which country have you supplied your products?
We have supplied to Thailand, China Taiwan, Vietnam, India, South Africa, Sudan, Peru , Brazil, Trinidad and Tobago, Kuwait, Qatar, Sri Lanka, Pakistan, Romania, France, Spain, Germany, Belgium, Ukraine etc. (Figures here only include our customers in latest 5 years.). 

E) I can’t see the goods or touch the goods, how can I deal with the risk involved?  
Our quality management system conforms to the requirement of ISO 9001:2015 verified by DNV. We are absolutely worth your trust. We can accept trial order to enhance mutual trust.